Wet Concrete Wall Spraying Machine Shotcrete Machine In Mining Equipment:
1 through the rotor-type non-adhesive material cavity, the material smooth, efficient and time-saving;
2 four-point elastic compensation compression, sealing effect is good, machine dust less, wearing a long life;
3 stream uniform, continuous and stable;
4 new nozzle, the material elbow device to improve the spraying effect, less rebound, spray layer of high quality.
To serve as the basis, to the quality of survival, technology and development
Wet Concrete Wall Spraying Machine Shotcrete Machine In Mining Equipment:
Pz-5 Dry Shotcrete Machine is mainly driven by motor, reducer, rotor assembly, sealing plate, rubber plate, compactor mechanism, hopper seat, mine wheel, vibration hopper, compression mechanism and air Systems and electronic control devices and other components. The motor shaft ends the drive gear shaft and, after decelerating by the gear unit, drives the rotor mounted on the output shaft to rotate. After the gears are decelerated by the gear unit, the rotor mounted on the output shaft is driven to rotate. The transmission gear is lubricated by the lubricating oil in the reducer box and the oil level is measured by the oil injection needle.
Wet Concrete Wall Spraying Machine Shotcrete Machine In Mining Equipment Use:
PZ-5 dry-mix shotcrete machine is a kind of common shotcrete equipment, which is widely used in engineering construction, mine, tunnel, culvert, subway, hydropower project, underground engineering and coal mine marsh roadway shotcrete construction work: all kinds Type of industrial furnace, lining the refractory spray molding or repair: all kinds of slope protection green construction, the soil transport and spraying. The machine can be used for tidal spray, can also be used for dry spray and a class of fiber jet operations.
Wet Concrete Wall Spraying Machine Shotcrete Machine In Mining Equipment Parameters:
FAQ:
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: What the exactly address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equipment.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long will you take to arrange production?
A7: we can delivery the normal goods within 7-15 days. Other nonstandard electrical items we will delivery within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with professional design team, OEM orders are highly welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of freight.
Q11: What is your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
Our Company Information:
We have been focusing on high-quality mechanical equipment and construction products for more than 20 years. Especially have rich experience at mining equipment, main products include:
Ultra Large Rock Splitter
Submersible Drilling Rig
Spraying Machine
Grinding Machine
About Our Factory:
About the products:
Packing and Shipping:
Purchase Process:
About the Quality:
Others:
Why you choose us:
1. We are a real factory offering products and provide free technical advice.
2. Company in business for many years and served Over 50 countries customers.
3. All machine with CE, ISO,SGS certificate. Machine and spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.
1 through the rotor-type non-adhesive material cavity, the material smooth, efficient and time-saving;
2 four-point elastic compensation compression, sealing effect is good, machine dust less, wearing a long life;
3 stream uniform, continuous and stable;
4 new nozzle, the material elbow device to improve the spraying effect, less rebound, spray layer of high quality.
To serve as the basis, to the quality of survival, technology and development
Wet Concrete Wall Spraying Machine Shotcrete Machine In Mining Equipment:
Pz-5 Dry Shotcrete Machine is mainly driven by motor, reducer, rotor assembly, sealing plate, rubber plate, compactor mechanism, hopper seat, mine wheel, vibration hopper, compression mechanism and air Systems and electronic control devices and other components. The motor shaft ends the drive gear shaft and, after decelerating by the gear unit, drives the rotor mounted on the output shaft to rotate. After the gears are decelerated by the gear unit, the rotor mounted on the output shaft is driven to rotate. The transmission gear is lubricated by the lubricating oil in the reducer box and the oil level is measured by the oil injection needle.
Wet Concrete Wall Spraying Machine Shotcrete Machine In Mining Equipment Use:
PZ-5 dry-mix shotcrete machine is a kind of common shotcrete equipment, which is widely used in engineering construction, mine, tunnel, culvert, subway, hydropower project, underground engineering and coal mine marsh roadway shotcrete construction work: all kinds Type of industrial furnace, lining the refractory spray molding or repair: all kinds of slope protection green construction, the soil transport and spraying. The machine can be used for tidal spray, can also be used for dry spray and a class of fiber jet operations.
Wet Concrete Wall Spraying Machine Shotcrete Machine In Mining Equipment Parameters:
Model | PZ-5 |
Jet capacity | 5.5/h |
Maximum transmission distance | 200m |
Water-cement ratio | <0.4 |
The maximum aggregate size | 15mm |
Feed pipe diameter | φ50mm |
Working pressure | 0.2-0.6MPa |
Air consumption | 7-8/min |
Drive power | 5.5kW(7.5hp) |
Voltage level | 380V,440V,660V,1140V 50Hz/60Hz |
Chassis | chassis can be assembled into a tire type, slippery type, rail wheel type |
FAQ:
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: What the exactly address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.
Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equipment.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long will you take to arrange production?
A7: we can delivery the normal goods within 7-15 days. Other nonstandard electrical items we will delivery within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with professional design team, OEM orders are highly welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of freight.
Q11: What is your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
Our Company Information:
We have been focusing on high-quality mechanical equipment and construction products for more than 20 years. Especially have rich experience at mining equipment, main products include:
Ultra Large Rock Splitter
Submersible Drilling Rig
Spraying Machine
Grinding Machine
About Our Factory:
About the products:
Packing and Shipping:
Purchase Process:
About the Quality:
Others:
Why you choose us:
1. We are a real factory offering products and provide free technical advice.
2. Company in business for many years and served Over 50 countries customers.
3. All machine with CE, ISO,SGS certificate. Machine and spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.